$1,016.99
Reduce weight and increase frontend rigidity in your 3rd gen F-body with a K-member from BMR Suspension. BMR K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate, BMR Suspension gives you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment. The KM007-1 K-member is designed to be used with a manual steering rack.Designed for street performance, drag race, and road race applications, BMR K-members drop weight and add loads of structural rigidity. BMRs unique K-member design features integrated engine mount that replace the heavy factory engine mounts. This additional weight reduction allows BMR to use larger diameter tubing and thicker mounting plates for additional strength over other available K-members. When combined with BMRs upper and lower A-arms, a weight reduction of 42 pounds is common. With other lightweight frontend parts, weight reduction of up to 100 pounds is easily achievable. This K-member works with your stock engine or you can easily swap to a traditional SBC or BBC engine with no fabrication.BMR Suspensions KM007-1 K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 4-5 hours. Proudly made in the U.S.A.!NOTE: Not compatible with OE A-arms.
Reduce weight, increase front end rigidity, and add clearance for large-tube headers and turbo kits with a KM007-1 Tubular K-members from BMR Suspension
Designed to fit 1982-1992 GM F-body;Lighter than other competitors K-members due to integrated motor mount design;Built from heavy-duty 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate;Not compatible with stock A-arms;Designed with SBC/BBC engine mounts;Designed with mounts for Pinto steering rack;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;4-5 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
Out of stock
Reduce weight and increase frontend rigidity in your 3rd gen F-body with a K-member from BMR Suspension. BMR K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate, BMR Suspension gives you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment. The KM007-1 K-member is designed to be used with a manual steering rack.Designed for street performance, drag race, and road race applications, BMR K-members drop weight and add loads of structural rigidity. BMRs unique K-member design features integrated engine mount that replace the heavy factory engine mounts. This additional weight reduction allows BMR to use larger diameter tubing and thicker mounting plates for additional strength over other available K-members. When combined with BMRs upper and lower A-arms, a weight reduction of 42 pounds is common. With other lightweight frontend parts, weight reduction of up to 100 pounds is easily achievable. This K-member works with your stock engine or you can easily swap to a traditional SBC or BBC engine with no fabrication.BMR Suspensions KM007-1 K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 4-5 hours. Proudly made in the U.S.A.!NOTE: Not compatible with OE A-arms.
Reduce weight, increase front end rigidity, and add clearance for large-tube headers and turbo kits with a KM007-1 Tubular K-members from BMR Suspension
Designed to fit 1982-1992 GM F-body;Lighter than other competitors K-members due to integrated motor mount design;Built from heavy-duty 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate;Not compatible with stock A-arms;Designed with SBC/BBC engine mounts;Designed with mounts for Pinto steering rack;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;4-5 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
Fitment
1982 Chevrolet Camaro
1982 Pontiac Firebird
1983 Chevrolet Camaro
1983 Pontiac Firebird
1984 Chevrolet Camaro
1984 Pontiac Firebird
1985 Chevrolet Camaro
1985 Pontiac Firebird
1986 Chevrolet Camaro
1986 Pontiac Firebird
1987 Chevrolet Camaro
1987 Pontiac Firebird
1988 Chevrolet Camaro
1988 Pontiac Firebird
1989 Chevrolet Camaro
1989 Pontiac Firebird
1990 Chevrolet Camaro
1990 Pontiac Firebird
1991 Chevrolet Camaro
1991 Pontiac Firebird
1992 Chevrolet Camaro
1992 Pontiac Firebird
