$1,032.99
Edelbrock Rollin’ Thunder Camshaft #2268 is designed for 348/409 (W Series) engines from 1958-65 and produce optimum torque from the low-end to the mid-range. Rollin’ Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you’ll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 451HP and 470 Ft Lbs of Torque when paired with Performer RPM intake manifold #7159, Performer Series Carbs #1412, Performer RPM cylinder heads #60815 and Edelbrock roller tappet lifter set #97423. Must use a high stall torque converter. Camshaft specifications: – Intake duration: 230 Degrees – Exhaust duration: 234 Degrees – Intake lift: .616″ – Exhaust lift: .628″ – Lobe separation: 112 Degree – Intake Center Line: 107 – Vacuum: 10″
Edelbrock Rollin’ Thunder Camshaft #2268 is designed for 348/409 (W Series) engines from 1958-65 and produce optimum torque from the low-end to the mid-range.
Chevrolet:W-Series:348 (5.7L)/409 (6.7L)
Out of stock
Edelbrock Rollin’ Thunder Camshaft #2268 is designed for 348/409 (W Series) engines from 1958-65 and produce optimum torque from the low-end to the mid-range. Rollin’ Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you’ll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 451HP and 470 Ft Lbs of Torque when paired with Performer RPM intake manifold #7159, Performer Series Carbs #1412, Performer RPM cylinder heads #60815 and Edelbrock roller tappet lifter set #97423. Must use a high stall torque converter. Camshaft specifications: – Intake duration: 230 Degrees – Exhaust duration: 234 Degrees – Intake lift: .616″ – Exhaust lift: .628″ – Lobe separation: 112 Degree – Intake Center Line: 107 – Vacuum: 10″
Edelbrock Rollin’ Thunder Camshaft #2268 is designed for 348/409 (W Series) engines from 1958-65 and produce optimum torque from the low-end to the mid-range.
Chevrolet:W-Series:348 (5.7L)/409 (6.7L)
Fitment
1961 Chevrolet Bel Air
1961 Chevrolet Biscayne
1961 Chevrolet Brookwood
1961 Chevrolet C10 Pickup
1961 Chevrolet C20 Pickup
1961 Chevrolet C30 Pickup
1961 Chevrolet Impala
1961 Chevrolet K10 Pickup
1961 Chevrolet K20 Pickup
1961 Chevrolet Kingswood
1961 Chevrolet Nomad
1961 Chevrolet Parkwood
1961 Chevrolet Suburban
1962 Chevrolet Bel Air
1962 Chevrolet Biscayne
1962 Chevrolet Impala
1963 Chevrolet Bel Air
1963 Chevrolet Biscayne
1963 Chevrolet Impala
1964 Chevrolet Bel Air
1964 Chevrolet Biscayne
1964 Chevrolet Impala
1965 Chevrolet Bel Air
1965 Chevrolet Biscayne
1965 Chevrolet Impala
