$400.99
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB003 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 25mm DOM tubing, the SB003 is cold formed to better resist torsional fatigue and retain its “memory” far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB003 attaches to your Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection.BMR Suspension designed the SB003 sway bar for street performance, drag race, autocross, and road race applications. The SB003 gives you a 149% increase in rate over the stock bar (depending on year and model). These rate increases allow you to fine-tune the handling characteristics of the suspension so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB003 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!All kits come with polyurethane mounting bushings and endlink kits.
BMR Suspension designed the SB003 sway bar kit for street performance, autocross, and road race applications.
Fits 1982-2002 GM F-body;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;149% increase in sway bar rate (depending on year and model);Cold formed to better resist torsional fatigue;Manufactured from 25mm heavy-wall DOM tubing for increased strength;88-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Durable powdercoat finish;1-2-hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB003 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 25mm DOM tubing, the SB003 is cold formed to better resist torsional fatigue and retain its “memory” far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB003 attaches to your Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection.BMR Suspension designed the SB003 sway bar for street performance, drag race, autocross, and road race applications. The SB003 gives you a 149% increase in rate over the stock bar (depending on year and model). These rate increases allow you to fine-tune the handling characteristics of the suspension so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB003 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!All kits come with polyurethane mounting bushings and endlink kits.
BMR Suspension designed the SB003 sway bar kit for street performance, autocross, and road race applications.
Fits 1982-2002 GM F-body;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;149% increase in sway bar rate (depending on year and model);Cold formed to better resist torsional fatigue;Manufactured from 25mm heavy-wall DOM tubing for increased strength;88-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Durable powdercoat finish;1-2-hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
Fitment
1982 Chevrolet Camaro
1982 Pontiac Firebird
1983 Chevrolet Camaro
1983 Pontiac Firebird
1984 Chevrolet Camaro
1984 Pontiac Firebird
1985 Chevrolet Camaro
1985 Pontiac Firebird
1986 Chevrolet Camaro
1986 Pontiac Firebird
1987 Chevrolet Camaro
1987 Pontiac Firebird
1988 Chevrolet Camaro
1988 Pontiac Firebird
1989 Chevrolet Camaro
1989 Pontiac Firebird
1990 Chevrolet Camaro
1990 Pontiac Firebird
1991 Chevrolet Camaro
1991 Pontiac Firebird
1992 Chevrolet Camaro
1992 Pontiac Firebird
1993 Chevrolet Camaro
1993 Pontiac Firebird
1994 Chevrolet Camaro
1994 Pontiac Firebird
1995 Chevrolet Camaro
1995 Pontiac Firebird
1996 Chevrolet Camaro
1996 Pontiac Firebird
1997 Chevrolet Camaro
1997 Pontiac Firebird
1998 Chevrolet Camaro
1998 Pontiac Firebird
1999 Chevrolet Camaro
1999 Pontiac Firebird
2000 Chevrolet Camaro
2000 Pontiac Firebird
2001 Chevrolet Camaro
2001 Pontiac Firebird
2002 Chevrolet Camaro
2002 Pontiac Firebird
